Topics created by Alishkus

@CaLviNx said in Burned board?:

I see the mention of it being required to come before the M143 command on the G code dozuki page, what is the official reason for this order requirement.

So that we can set a lower default maximum temperature for a bed or chamber heater than we do for an extruder.

@dc42 Ok. 16hours of work per day does not lead anywhere.... stupid me.
Now homes perfectly.

G91 ; Relative Positioning
G30 ;
G32 ;
G90 ; Absolute Positioning
G1 Z2 F4000
G1 XY0 F4000

Look at these perfect lines :))
1_1550772222569_IMG-0680.JPG 0_1550772222569_IMG-0682.JPG

Machine works, however Fusion 360 is still not really suitable for Duet board. I will try to do some configuration on Fusion and if it will work will post here 🙂

@phaedrux lower your accelaration, increase Jerk.
Make sure all belts and at right tension

It does sound that your Duet may be faulty, so I suggest you ask for a replacement.