@Phaedrux I'm only using Word to print.

I have created PR489 for this with my changes.

Disclaimer; I'm not a native Dutch speaker and have never worked in a workshop here, so I may have missed things, used wrong terms or made other mistakes.. Still, it should be better than before 😉

@brampie if you have a GitHub account you can comment on the PR (if @chrishamm wants to hold the PR for a few days to gather comments).

@Bill-Duet-3D you may way to update the firmware first.
grab these files and put it in a folder called firmware on the SD card
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.1/Duet2CombinedFirmware.bin
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.1/Duet2_SDiap32_WiFiEth.bin
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.1/DuetWiFiServer.bin
and extract this zip to the www folder
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.1/DuetWebControl-SD.zip

the run M997 and M997 S1 via terminal to update everything
then try adding your wifi details again
if it still doesn't work, grab a new M122

@paul12345 said in DWC 3.5.0 gcode uploading via LAN error:

now with firmware 3.5.0-rc.3.

Can you update to 3.5.1 that has just released?
https://github.com/Duet3D/RepRapFirmware/releases/tag/3.5.1

Is this happening with all 6HC boards, or just one particular one?

@paul12345 said in DWC 3.5.0 gcode uploading via LAN error:

The problem exist on 3x PC win10 and win11 and also on Linux mint.
It does not occur on any OS connected via Wifi.

HOWEVER - if I install new win11 on another HDD (same PC), files uploads without issue.

@paul12345 said in DWC 3.5.0 gcode uploading via LAN error:

I thought maybe its my win10, so I reinstalled the system to win11 and still nothing.

This is a bit confusing. You say that it doesn't work after updating to win11, and also that it does work after updating to win11.

@Phaedrux Everything worked fine after clearing the cache (Chrome browser)...Who could have Imagined? Now the input shaping appears as a "Integrated Plugin" instead of a "External Plugin". Upgraded to 3.5.1 without problems...

Thanks you very much. Learned something new today!

@gloomyandy No no... I'm sorry if you misunderstood me, please bare with me, I'm German. 🙂

let me add a cable to ground the revo, just to strike this problem out. This will mean to me that I have to pull the plug of the printer and we loose the opportunity to have a look at a memory dump or similar according to my other problem.

Cheers, Chriss

@gloomyandy I could do that.. if you think that this makes sense. Please take in count my https://forum.duet3d.com/topic/35413/firmware-3-50-rc-4-stops-working thread. I do not want to brake the debugging there.

Long story short: We should focus on one thread, I guess. I have the feeling that my board went mad or the rc4 has at least one serious problem. I'm a bit surprised that there are not more complains. I could not the only one using 3.5.0-rc.4 in the wild.

Cheers, Chriss

@scaulier the extrusion control in DWC just controls the active tool, switch tools to control the other one. If you want to extrude from both at the same time then combine them into a single tool.

I was provided an update 3.5.0-rc.3+5 and that fixed it.

Thanks for the folks that replied.

Allen

@gloomyandy and @elmoret Thank you! I will change the config.g file and see if that fixes the problem.

@Albatroz END_PRINT looks like a Klipper type macro invocation; in their infinite wisdom they decided to use bare words for this without regard for the GCode standard.

In RepRapFirmware this means the bare word is applied to the previous line as a parameter, which yields the error you observed.

You can replace END_PRINT with M0 if you want to invoke end of print behavior, which you can tweak using the 0:/sys/stop.g macro.

@Grant_fm

Duet Web Control 3.4.4

Update your version of DWC to the 3.5.0-rc3 release candidate here: https://github.com/Duet3D/RepRapFirmware/releases/tag/3.5.0-rc.3
Use "DuetWebControl-SD.zip".

Ian

@usinjin Good catch! Glad you managed to resolve it. All to easy to fall into thinking traps!

Ian

@z_big I would try changing the router password to something really simple, at least to test connection. Something with no special characters, just upper case and numbers. Are you still using the serial terminal in Simplify3D still to send the commands? Can you also screen shot the Router setup (obfuscate the SSID and password as necessary), maybe there's something in there?

Please also send M122 to the Duet and post the response, if possible.

Ian

Thank you so much! you guys ROCK

Please try configuring your Duet in Access point mode where the Duet creates a network SSID that you connect your device to.

https://docs.duet3d.com/en/User_manual/Reference/Gcodes#m589-configure-access-point-parameters

This will help isolate whether the problem is with the Duet side or your routers side.

@oliof You got me some learning curve 😂
I would have prefered something more ... 👙 ish for weekend

At least I will get my revenge with this:

M300 S1000 P500 G4 P1000 M300 S1500 P500 G4 P1000 M300 S1200 P500 G4 P1000 M300 S1350 P500 G4 P1000 M300 S1500 P500 G4 P1000 M300 S1350 P500 G4 P1000 M300 S2000 P500 G4 P1000

What does this means? I tried to play some ET sounds, at least in PanelDue, and first I used:

M300 S1000 P500 G4 P500 ;etc

It is true that in documentation, it is specified that the pause should be AT LEAST the same as the tone duration, but... it does not work. It worked only when the G4 was DOUBLE than the tone length. I mean, I only tried with 600, after 500, and jumped directly to 1000, wich worked.

@T3P3Tony I did look through the code. Unfortunately, .NET is where I'm least proficient... I can somewhat interpret what's going on, but I'd probably need to do it in React/TS/Node if I was going to be remotely productive. If I do something I'll open source it though so maybe I can try and fill that void if you guys aren't sure if you'll further mature the existing solution. I can't imagine the demand is that high--I actually wanted it less for full blown farm management and more for queuing for a single printer.

@dc42

Is there any way to look up or request DWC to record the actual print time?