Topics created by Alex.cr

@dc42 The binary for the 1LC worked to resolve the issue. Thanks for the fast turn around and I will continue beta.2 testing.

By the way it is a V1.1 version tool board.

@Alex-cr I just published a new Motion webcam server plugin. That version is compatible with Debian Buster and Bookworm. See https://github.com/Duet3D/MotionWebcamServerPlugin/releases/tag/v3.5.1

@Alex-cr if a new DSF build is not needed then I will probably provide new RRF binaries to fix this at the end of this week. If a new DSF release is needed, we will aim to release beta2 next week.

@dc42 said in 1HCL closed loop steppers on CoreXY:

M350 X16 Y16 I0

Hi David, I gave it a go and it was much worse without the interpolation. On a side note, it doesn't seem you can change that parameter on the fly as I was getting this error and the printer would unhome x and y, but the z was fine

4/20/2022, 6:50:19 AM M350 X16 Y16 I1 Cancelled printing file 0:/gcodes/Voron_Design_Cube_v7.gcode, print time was 0h 3m Error: G0/G1: insufficient axes homed 4/20/2022, 6:46:38 AM M32 "0:/gcodes/Voron_Design_Cube_v7.gcode" File 0:/gcodes/Voron_Design_Cube_v7.gcode selected for printing 4/20/2022, 6:45:32 AM M350 X16 Y16 I0 Cancelled printing file 0:/gcodes/Voron_Design_Cube_v7.gcode, print time was 0h 1m Error: G0/G1: insufficient axes homed 4/20/2022, 6:44:00 AM M32 "0:/gcodes/Voron_Design_Cube_v7.gcode" File 0:/gcodes/Voron_Design_Cube_v7.gcode selected for printing

Regards,
Sam

@dc42

Update worked. Thanks!

@owend

Thanks for looking at that! Great idea for a test.

@alex-cr said in Laser issue - less "power" when moving in "X":

But something interesting is going on because now my original link does not link it to the 15W side but rather back to the NEJE store showing 10W output. Now I am really confused.

In the past, NEJE got lots of negative customer reviews, because they advertised their modules with 40W. They didn't lye, because that's the input power. Now they are rowing back and advertise it with output power. Because of the FAC lens, they could focus the beam even more, so they called it 15W optical power. The bashing never ended, so they started to call it what it is: 10W output power, but 15W optical power from higher density.

@alex-cr said in Laser issue - less "power" when moving in "X":

Rotating the laser showed that it can now cut while moving in X but not in Y.

I can only guess, that their fixed focus isn't adjusted well, so you are using a less optimal module height.
I've seen a simple test video where someone placed a piece of MDF at an angle and lasered along the slope. That way he could find the sweet spot of his module.
If I find the video, I'll post it here. Skip the unboxing and start watching at around 3:00 mins.

@alex-cr thanks, the "All averaging filters OK" was what I wanted to see, to eliminate a possible cause.

@phaedrux

I ordered it from Filastruder to a US address on April 7th 2021.

Not a problem I will send them email.

We hope to release 3.3RC1 later today. It includes fixes for these stack overflow issues.

@alex-cr said in Potential firmware issue - bltouch:

M558 P9 C"0.io7.in" H5 A3 S0.005 F120 T9000 K0

This should have the pull up resistor enabled. It’s a commonly overlooked issue with bltouch installations.

Try this instead. Note the caret.

M558 P9 C"^0.io7.in" H5 A3 S0.005 F120 T9000 K0

Thanks, I'll mark this as solved then.

Thanks man! that solves my issue. I should have known that... I figured it was easy.