Topics created by Heartleander81

@dc42 Many Thanks. Unfortunately, I'm not an electrician and can't read anything out of the schematic. If it were a blueprint of machines I could do that 🙂

@rushmere3d
I clamped the line for the signals between the ramen and the motor and I suspect that I have generated interference signals.

@heartleander81 that’s great
I’ll make myself a pcb described on the same page for my duet2 when I have some spare time.

@dc42 No problem.
There are more problems that need to be solved.
Understand that this can take a little longer.
Ok then I'll send an email with a reference to the post.

Many thanks for the help.

@oozebot Yes, I get 2 warnings when loading the config. It doesn't seem to matter. Will start a test print with it tomorrow. Unfortunately, I don't know why M999 doesn't work for me in the macro.

@dc42 thank you for All. 👍

@phaedrux thanks for your Info.

I hope the board was not damaged by the accelerometer error.

If necessary, I have a new Duet3 6HC board at home since yesterday as a replacement.

@dc42 ok. Them is out3 but on this pin I dount have anytime a heater ore something connected.

Ok then test I the out9 with a fan. I hope it is ok...

Thanks DC42

@heartleander81 said in Accelerometer D3 6hc Stabdalone ?:

Now I just have to find out whether you move X and Y alone or together.

I suggest you collect accelerometer data for movements of just one axis at a time.

@heartleander81 now have I set a G92 E0 in the slicer after my loadet file then work the extruder

@gruen Try this release: https://github.com/Duet3D/RepRapFirmware/releases/tag/3.3beta2

Thanks for the update.

@Heartleander81 said in Bl-Touch self extended:

I think that was it.

So it's working now?

@dc42 said in Duet3 6HC / BerdairPump:

Duet 3 1.01 has internal flyback diodes on all OUT pins except OUT_0.

Nice to know Thanks David

@Phaedrux I have write T0 at custom settings are not defined and save the config.g.

I am so happy.

Thanks. It is work. I used the 3te usb cabel and now is it running. I can use the Pi sd card. This version is for both, pi and Board.

How can i close the thread?