@the_dragonlord said in Some other little hints for starting...:
I need to know is how adjust the X and Y offsets for the nozzle to make it to be placed in the right coordinates of the plate. I try to explain better: my plate is 330x330 mm and I want that if I send the nozzle G1 X165 Y165 the nozzle will be placed exactly in the middle of the plate.
I'm not sure I fully understand your question.
There is a command to set the X and Y offsets for the nozzle but they are not used for that purpose.
That command is used when you have a printer that has two nozzles and you need to tell the firmware how they are physically positioned, relative to one another.
If the goal is simply to have G1 X165 Y165 move the nozzle to the center of the bed then I need to know what the command is doing now instead.
Thanks.
Frederick