Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. bartekp
    3. Topics
    • Profile
    • Following 0
    • Followers 0
    • Topics 12
    • Posts 76
    • Best 3
    • Controversial 0
    • Groups 0

    Topics created by bartekp

    • bartekpundefined

      What is IAP file

      Firmware installation
      • • • bartekp
      3
      1
      Votes
      3
      Posts
      206
      Views

      bartekpundefined

      @droftarts thank you

    • bartekpundefined

      Is there eny easy software to use instead Bossa??

      Firmware installation
      • • • bartekp
      2
      0
      Votes
      2
      Posts
      113
      Views

      droftartsundefined

      @bartekp Not reliably. You can try SAM-BA, which is documented in the second tab after Bossa, here https://docs.duet3d.com/User_manual/RepRapFirmware/Updating_firmware#all-other-duet-boards

      Does the Duet show up in the USB devices? If not, more likely that you're using a USB cable that is for power only, ie no data lines. Try a different USB cable, and/or different USB port.

      Bossa also won't recognise the Duet if the firmware has not been erased. Or it's possible that the USB connector has failed. Do any LEDs light up on the board? If so, go through the list here: https://docs.duet3d.com/User_manual/Troubleshooting/Duet_wont_respond

      Ian

    • bartekpundefined

      Prussa slicer Issue ?

      Third-party software
      • • • bartekp
      2
      0
      Votes
      2
      Posts
      212
      Views

      tasundefined

      @bartekp

      PrusaSlicer is telling your printer to move farther than the bed limits in your config file. That is why the back end of your print is cut off.

      It looks like the bed dimensions shown in PrusaSlicer do not match your actual bed so that has to be fixed.

      Your part is centered on the bed in the slicer but not on the actual bed.

      I have found these issues are related to the origin in the 'bed shape' for PrusaSlicer but the way to fix it is rather complex.

      First set the origin in PrusaSlicer Printer Settings - Size and coordinates - Bed Shape - Set to X:0 Y:0. I know that is not how you are supposed to do it but it is the only way I could get it to work. My X = 0 is actually X = +7mm on the bed but I ignore that.

      Measure the total movement of your nozzle from your 0, 0 point to the maximum in X and Y. Set those values as the X and Y Size in Bed Shape - Settings.

      On my printer my total X travel is 364mm and Y travel is 387mm.

      In config.g M208 (Axis Limits) set these same X and Y values. So for my printer:
      M208 X0:364 Y0:387

      The final part of the solution is to create a custom bed image to show the actual bed limits.

      To do this create an image where one pixel = 1mm. This makes it much easier to draw an image to scale. Draw the image to reflect the actual origin. It should also show any keep out zones. In my case I have a glass sheet with bed clips all around. The clips extend 5mm into the bed.

      Here is my bed image as an example (Creality Ender 5+ with LGX Lite Pro and REVOsix):
      5Plus w REVO Bed printable.png

      Load the image in PrusaSlicer Printer Settings - Size and coordinates - Bed Shape - Set - Texture - Load and select your custom bed image.

      I used a solid red border to indicate where the clips are. Orange is where I do not like to print as it is too close to the edge of the bed. Notice on the left side there is no red area because the nozzle can not reach far enough to touch the clips so there is no danger of hitting them.

      The black/striped area at the front of the bed is where the nozzle can reach but there is no bed under it.

      This allows me to place objects on the bed in Prusa Slicer and have them print in those exact locations on the actual bed.

      I hope that helps.

    • bartekpundefined

      Solved Hi my fans dont work i cant find answer ho to run them

      Tuning and tweaking
      • • • bartekp
      10
      0
      Votes
      10
      Posts
      265
      Views

      bartekpundefined

      @gloomyandy via DWC fun running solved

    • bartekpundefined

      Frustrating level High please Help !!!

      General Discussion
      • • • bartekp
      6
      0
      Votes
      6
      Posts
      171
      Views

      bartekpundefined

      @oliof OK JA CHANGE THE CABLES THANK YOU FOR HELP

    • bartekpundefined

      Solved Strange behaviour XY moves

      Tuning and tweaking
      • • • bartekp
      4
      0
      Votes
      4
      Posts
      170
      Views

      bartekpundefined

      ok Thanks for help topic closed

    • bartekpundefined

      Mosfet death on hbed can I avoid the to connect ssr?

      Duet Hardware and wiring
      • • • bartekp
      3
      0
      Votes
      3
      Posts
      155
      Views

      T3P3Tonyundefined

      @bartekp do you have a spare fan header. you can use that to control an SSR.

    • bartekpundefined

      DUet 2 FIREDAMAGE by heat bed burning out connectors

      General Discussion
      • • • bartekp
      11
      0
      Votes
      11
      Posts
      473
      Views

      bartekpundefined

      @jay_s_uk Works fine Thanks problem solved

    • bartekpundefined

      Homing testing issue

      Duet Hardware and wiring
      • • • bartekp
      10
      0
      Votes
      10
      Posts
      346
      Views

      bartekpundefined

      @engikeneer I kickout this M92 and works fine !!! 3 weeks of fight thanks wery much

    • bartekpundefined

      Z homing issu whit endstop please help

      Duet Hardware and wiring
      • • • bartekp
      56
      0
      Votes
      56
      Posts
      1.7k
      Views

      bartekpundefined

      @bartekp
      im back to the homing , still is some thing wrong because I try to print some sample ,when ar homed all axis I set the print and as always printer start homing and at the end the z axis go down to the max low position I men down I give up

      I some starting procedure ??

    • bartekpundefined

      Homing issue need help

      Using Duet Controllers
      • • • bartekp
      2
      0
      Votes
      2
      Posts
      151
      Views

      T3P3Tonyundefined

      @bartekp no need for multiple threads on the same issue
      https://forum.duet3d.com/topic/25363/homming-issues-strange-behaviors/6

    • bartekpundefined

      Homming issues strange Behaviors

      Config Tool
      • • • bartekp
      14
      0
      Votes
      14
      Posts
      529
      Views

      T3P3Tonyundefined

      @bartekp ahh right ok, thanks for letting us know what the issue was!