Topics created by HenryDara

Finally it did upgrade one of my machines to the new DWC, I think only when I did a full install rather than just the DWC. Not sure, it was real late.

Kind of related to what @Danal was saying, I had another problem with uploading a full set of configuration files. Heres what I did...

Selected all files in configuration, including pause.g, etc Heres a shot of the folder after it downloaded showing all the files...
Zip Download.JPG

Then I uploaded those files to a different configuration folder the normal way using the "Upload system files" button, then selecting the download.zip. After it was done it reported 29 files downloaded, and the folder shows the new dates on the files, so it looks ok.

download succesful.JPG

But when I really look only 14 files made the trip, so no pause.G, etc. Which by the way causes some very strange behavior on the printer when they are not there 🙂

only 14 files.JPG

I can get past this by just pulling the SD card, but it seemed worth sharing, and to get any thought about errors on my part.

Thanks again...HD

@Phaedrux Thanks for the update. Yes cosmetic, but causing us to make mistakes when setting individual nozzle temperatures. We adjust the numbers in our head for now, so I hope we can untrain when the numbers are correct on DWC2. Any idea how long before DWC2 gets released?

Thanks...HD

Ahhh, I understand, thanks. 🙂

Edit 2...still messed up with 2.0.7 after updating to the latest. I have added another heater since the original post, so thats why theres a 6 now. Seems like it just hates "6"s

Darn, hoped that was it. 😞

@chrishamm

Capture.JPG

@deckingman That makes perfect sense. The times it worked best are the times I was printing Ultrafuse which doesnt run the fan at all. Son of a gun. 🙂

Thank you for your help!!

@Danal That would be nice, but I can have up to ten heads, so thats lots of servos or other. I am thinking of a "tool Present" signal for each head to a dig in, which can then drive my tool parameters somehow. I like that idea though. I could add an LED to show each extruders status. All green = all good. 🙂

What is the full step resolution of your z axis?
What is the step size of the baby stepping you're trying to apply?

Oddly enough since my earlier post I cannot get it to do it now, when I could make it happen every time before. Dont think I did anything to fix it, so I will keep an eye on it. Will also upgrade away from Beta. Its a coreXY BTW. Thanks

@henrydara You need to set the mixing ratio for the tool to 1.00:1.00. I'm on my phone right now and can't off hand remember the gcode command so you'll have to look it up.

@henrydara said in Pausing mid print and elsewhere.:

Should I try a different resistor next?

I suggest 1.2K or 1.3K.

Keep stepper motor wiring away from the ribbon cable.

😂 Thats too funny. Just like me seeing past the obvious. Thank you sir. 🙏

@henrydara said in Auto Bed Compensation probe point order question:

M671 X12:455:455 S3 Y167;337;64 ; Set XY offsets for Z screws

I think you've re-posted this and I've already answered it; but the problem is that you've used semicolons instead of colons between the Y values in that line.

@dc42 I got it, thanks for the help. Im my own worst enemy sometimes. Thankfully you've been there to catch me.

@bret4 said in Paneldue button location incorrect:

Even with calibrate my big fingers sometimes push the wrong buttons on the touch screen. I have used a touch stylus at times to make it easier.

Try using the tip of your fingernail.

@pi Please start a new thread.

https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-help?_=1613530139742