Topics created by timcurtis67

@dc42 Thanks David.
Just putting the request out there ☺

I like the pop up screen idea for controlling tools. 👍

Okay David, now I'm following you. Thank you for the info. It's not a big deal I just wanted to make sure I didn't miss something.

The new firmware is working great! I'm running 20 out of 24 hours per day for the next 10 days with the IDEX ditto printing. Thank you for all the amazing work you guys do with the Duet!

Does https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M585_Probe_Tool do what you want?

Yeah I confirmed the work offsets work while in printer mode. They work well, Great job David!

I wasn't able to save them with M500 though. I can manually add them to my config file, I was just looking for a way to automate the process as a macro when changing hotends.

Yes it should work.

@Agniusm:

Would it be possible to have last print time next to a file in G-Gode files section. It would be good for tuning speed and for people printing same parts over and over. Also stored somewhere on SD rather than eeprom

One thing I have been considering is that when a file is printed of simulated, a comment giving the print time could be appended to that file. RRF and DWC would be able to extract that information. I'd probably make this optional, because some users might not want the Duet to modify their GCode files.

David,
I tried adding the Z moves in place of the X moves but it still didn't make a difference. It does the actual Z moves that I have in my TFree.g program but the actual G10 offset doesn't take place until I make a move after the tool change is complete.

Any other suggestions? It's not that big a deal, more of a preventing possible crashes if I'm not paying attention.

That's what I figured.

Okay, Thank you David.

@cubexupgrade:

I showed few weeks ago my printer to my fablab and i forget to bring a router with me. I used the access point from my smartphone to connect the printer and it works great. Maybe you can use this tablet functionality.

This is what I was hoping I could do, Bypass using the router at work (Its for a huge network in the building). I just wasn't sure if the DuetWiFi access point was capable of running the printer.

I did order a Panel Due with a 7" screen yesterday. They are back ordered right now but when it arrives I won't have to worry with transporting my printer to different locations.