@mfs12

Flashed RC6, tested - seems to have been solved. Thank You! 🙂

@mikeabuilder Thanks! That's option B which we listed above. It would less of an issue if Macros showed up on the main screen of our IDEX machines, but they don't - meaning the end user has to navigate to them to access.

@jay_s_uk Got it，Thanks！

@dc42 Thanks' a lot for adding this issue to Github

@Phaedrux

Thank you, I will try it.

Cheers,
Gumby

all available releases can be found on github including 3.4.0 for PanelDue 7.0i.

https://github.com/Duet3D/PanelDueFirmware/releases

@dc42 thank you for your support now it's working fine.

@mfs12 Thank you. Looking forward to the release.

@hzqqq best turn your WiFi off. Create a macro with M552 S-1 in then call that from the paneldue

@dc42
I've got it working now when i put the large res first in PrusaSlicer ( i had it the other way around first when it didn't work 64x64, 400x400).

Oh no i'm only using two images(400x400, 160x160). i just tried out 400x400, 64x64 for the sake of testing.

https://github.com/Duet3D/PanelDueFirmware/issues/289

mfs12 created this issue in Duet3D/PanelDueFirmware closed Wrong simulated time is displayed #289

https://github.com/Duet3D/PanelDueFirmware/issues/284

mfs12 created this issue in Duet3D/PanelDueFirmware closed Test "print again" with long filenames #284

@dc42 I'll check those solder points and report back.

Thank you @T3P3Tony for your response, it's helpful to know that it will be implemented sooner or later.

@jay_s_uk i got the same error and try as @64bit mentioned in the post but its not working for me.
i an waiting your reply @jay_s_uk