Update pictures:
AWD installed, 4 motors are all wired up and turning the right way.
Belts installed, archetype -breakneck tool installed. Toolboard mounted, and ready to go!
Can bus has been really easy to setup and I'm loving the simplicity in the wiring out to the tool head. I also made a decision to go for sensorless homing to completely remove the wiring harnesses from the xy axis.
Things left to do:
Tighten and sync AWD motors.
Finish wiring toolhead.
Install CPAP fan, wire, program it.
Print out frame parts for the CPAP fan because. I forgot to print those out.
Put everything back together and sort out firmware and macros for duet 3!!
IMG_2018.jpeg IMG_2017.jpeg