@jameswood It would also be fantastic if the list of filaments that's displayed when clicking "Load Filement" was sorted alphabetically or something. Currently it seems to be sorted by filesize? Custom sorting would be even better, or, if we're wishing really hard, subfolders!

this was exactly what i was looking for! thank you!

I'm not sure what you mean. Are you asking for a gcode that would check if you had the most up to date version and update if available? If so, there is nothing like that at the moment.

It would be problematic because usually the firmware updates contain some changes that may require modifications to your configuration. So at the very least you would need to read the update notes before deciding to update.

Something more automated could be worked into the DWC interface, or at least link back to the github release page and notes.

Will move to the DWC wishlist.

Sorry, yes layer height.

@OwenD said in Multiple Web Cameras:

@adamj12b
You could put the URL of the first camera in the normal DWC camera configuration and the URL of the second camera in the section that says something like "URL when image clicked"

Thats a good short term work around!

@Martin1454 said in Multiple Web Cameras:

Maybe you can run OBS stream, either on another device - Or if you have a duet 3 with an RPI, then on the RPI it self - That should be able to merge the 2 streams

I have not heard of OBS, but I will look into it and see if it could do this. I dont want to run anything too heavy on the Pi, as it will already be serving the 2 camera streams as well as taking to the 6HC and running NodeRed.

Wish I was that organizer and dedicated.. Im my own worst enemy lol

Interesting idea.

I wonder how many slicers can be configured to provide the needed information.

Frederick

@benkitesurfs I frequently open the video stream in another window. That gives me one browser window dedicated to DWC controls, and another dedicated to just the video feed.

Another option would be send gcodes for jogging directly in the "send code" prompt at the top of the DWC page.

Maybe move "Display" to the end of the list so the order of the standard entries (Files to System) isn't changed for people that have different printers with different setups? Or wholesale move it into the System section as a sub menu entry ...

@chrishamm said in Change Increments for Extrusion Rate +/- Buttons:

@CCS86 I agree, 5% is way too much but I haven't focused on this in a while. I'll reduce the step size to 1% in the next version (3.2).

Thanks!

Take a look at this: https://github.com/DanalEstes/MultiDuetWebMonitor

This and other community projects here: https://duet3d.dozuki.com/c/Community_Projects

@Phaedrux said in Heightmap viewer:

You can open the CSV in a spreadsheet program like Excel and create a graph to show the heightmap.

https://forum.duet3d.com/topic/9703/viewing-csv-file-without-dwc?_=1607756582592

Yes, that is true. But what Excel does not do easily, is pan. rotate and yaw the heightmap like we can in DWC.

Since DWC code has the viewer built in, can that web VIEWER implimented here at the Duet forums?

This is a screengrab I did with ShareX. [img]https://i.imgur.com/Ly0R87o.mp4[/img]

Granted it took me like 5 minutes to make, but to someone who lacks the skills and knowledge, it may be an frustrating experience.

Anyhow, I think I am suffering from sag and I will take that issue to the other parts of the forum.

sinneD

wrong thread, sorry.

@Kolbi said in Request 'Admin' account/password for DWC:

I would like to see the addition of an 'Admin' password for DWC.

Just like any other computer system, creating a separate admin account allows for the proper separation of duties and configuration/security. Of course I want end-users to use the device but they shouldn't be able to change the system files or macros unless it is warranted and approved, or they agree to take full responsibility.
Far too many times someone comes along who is smarter, and knows better, that just cannot keep their hands out of the 'cookie jar' and inadvertently causes damage – firsthand experience, both sides of the fence. And yes, I know that a person can simply remove the sd-card and make changes, but that is a bit different - in this case the person would have to take the time and effort to open the machine, break the tamper seal, and then own the potential problems to be faced with.

Cheers,
Kolbi

Hi,
same suggestion from my side: I´ve build a printer with/for students and I am sure on the long run that is a good way to go. For now the only workaround is that e.g. you can only allow them to use paneldue, but of course with the new nice plug-ins even though I haven´t visited the place for months (the local workshop stuff is now in charge for it) I am sure something like that needs to be done. Because I am not sure that even on the longrun paneldue will get the plug-ins that DWC is getting...

Or is there a way tu run DWC on a local machine for development by disabling the Duet connection or redirecting it to the SBC?