Can you post a better photo of the screen? It looks more like the screen is damaged than a firmware problem.

Issue Found!
Screenshot_001.jpg
Turns out the copy instruction is native to windows and not the program itself. The documentation doesn't make it very clear that this instruction line shouldn't be prepend with 'bmp2c.exe'. Or it could just be me a bit slow on the uptake.

anyway, all sorted!

I'm still testing, for now it seems to me that panel two responds well. I created a new cable to connect duet 3 to I 0.0 to panel two. I reserve the right to update the outcome

So the only problem now is that you're seeing Error: Bad command: 53 after an emergency stop reset?

@eddiie to see what new features you would get by upgrading the controller and installing latest firmware, go to https://github.com/Duet3D/PanelDueFirmware/releases and add together new features from the release notes for all releases going back to 3.2.0.

@phaedrux

Thanks a lot for your answer

Danijel

@eddiie I found it on the datasheet. "Recommended External Series Resistor" 27 ohms. Same as R2.

@that-guy-e said in Panel Due Jog Axis In Message Not Displaying:

@dc42 @mfs12

Thank you. I can reassign A to U and post process gcode for the interim. Do you guys have any timeline for the next panel due firmware update?

Note yet, but we may have news soon.

For future reference are thing like this best brought up here or github?

Here, because it's not always obvious whether an issue needs fixing in RRF, PanelDue, or both.

@oliof yes it's a maintenance release for those unable to use more recent PanelDue firmware, and it will work on v1 PanelDues; but it won't bring anything new to users who were already running the previous 1.x release. The sole purpose of this release is to accommodate the different backlight chip that was fitted to some recently-manufactured integrated PanelDues because of the ongoing electronic component shortage.

@dc42 Thanks for tips. Yeah just touch panel stopped working. Display working normally. Try disconnect that CON3 ribbon cable and plug that again couple times. Not helped still not get any touch input.

Checked that replacement panel even try buy that but cheapest option postages is 55dollars and thats too much (55 + 19 dollars + taxes).

Marking as solved due to inactivity. if the issue still persist feel free to reopen the thread.

@mfs12 thank you, first time i had seen it come up and wasnt sure what it was.
Cheers

@JayT, check function "CreateScreensaverPopup" in src/UI/UserInterface.cpp. Good luck

@simonjb thanks