Topics created by AlexLin

OK that is fine then when it is a warning 100C will trigger the fan

@AlexLin said in Homing after cancel print RRF 3.0:

was a bit hesitant to upgrade to an RC...but you would say that RC12 is more reliable than 3.0?

Yes. We are very close to releasing RRF 3.01 stable.

Read the upgrade notes because there are changes to configuration of PanelDue, bed heaters, and (in some cases) endstops.

excellent!

@nicolab28 thanks, that worked....but I guess it is not how is supposed to work, But for now it will do. At least I don't have to switch to the old DWC

could it be related to https://github.com/dc42/RepRapFirmware/issues/274 ?

try again with a really big file, see if that makes a difference

frank26080115 created this issue in dc42/RepRapFirmware closed [RRF 2.02 WIFI 1.22] FTP transfer of large files truncated to 2048 bytes on SD card #274

@paul12 disable what?the plug-in...that was something very specific for me since I obviously had turned it on in th elast print in an earlier version. You should be good with th erelative extrusion turned on

I would imagine tool usage times would be quite useful for certain tool types like cutting heads, or lasers, or what have you, where preventative maintenance may prescribe change out before failure or reduced effectiveness.

@Dav

So you can put it at the end of your config file:

[...] M593 F60.1

Or just use the web interface or Panel Due console.

Where it says "Send code..." in the web interface, type M593 F(Your value here) and press enter.

Did you get the latest windows 10 update that was rolled back?