@bearer going to to it this way and hoping the next rpi will survive for longer than 4 months - otherwise i think it would be best to go without an rpi - lost functionality but no rpi.

sorry for any inconvenience ..

Thank you for your prompt reply.

RTFM? What? What the hell is wrong with you LOL.

Smells like a firewall or indeed two different networks; compare the mac address for the gateway on each computer?

@Carlo Great, thanks for letting me know!

@Phaedrux Absolutely. Honestly, I was trying to get everything printing efficiently before learning how to actively use the probe! I had been having an issue with a solid mount that didn't move the probe when I changed out a nozzle too, but that has, luckily, been remedied as well. 🙂

Thank you!

@barbarossa-cologne said in manually extrude driver 2 on DWC?:

M563 P0 D0 H1 F0 ; define tool 0

change this to
M563 P0 D1 H1 F0 ; define tool 0

The D parameter selects which driver to use for tool 0

@Phaedrux said in Web Control Look and feel:

i

ok perfect thank you. Thats all done. Now to sort the wiring out (rofl)

Im sure we will chat again haha but really appreciate your help!!

@gtj0 said in DWC3 Webserver Documentation:

You're my hero!
Thanks! That was exactly what I was looking for. No clue how I missed it!
Thans a lot gtj0

@Phaedrux said in DWC 3.1.1 refuses to revert to DWC1:

Definitely more than just a theme. A lot of future functionality required a lot of changes to the underlying framework.

i think i will add a feature request for DWD2 to be able to use the DWC1 themes....

I saw, but its inconsistent from one post to the next.

USB can help supply 5v if the onboard 5v supply is damaged. Measure the 5v voltage with and without USB.

To rule out corruption update to 3.1.1, format the SD card (not quick format, and use SD formatter tool) and manually re-flash the wifi with M997 S1, in that order perhaps?

@deckingman I'm fine with it.

@Phaedrux said in Missing sensor in web interface:

@maxspongebob said in Missing sensor in web interface:

but anything other than zero turns the heaters on.

say that a few times out loud. turning it on... turns it on...

Ok, so the T0 at the end of my config set the flag in the DWC as active. I should have seen that, sorry.

Ok, configuring the bed heater sets it as active. It would be nice if after a reset, I could set it to off or standby.

With the pump, yes, S1 is on and S0 is off, but it also has a slider on the DWC that changes the value. I really was looking for just an on/off button.

Still learning. Thanks.

Nope! We just fixed it xD and I berated my husband for it lol.

Try now.

@peter247 Things changed on 3.1. According to the release notes, speed factor override does not affect extruder only moves (nor any move commands that are in macros). So retractions shouldn't be affected.

This has happened to me once before a long time ago, but never happened again.

Can you provide the results of M122 after the reset if it happens again?

I assume this is running firmware 3.1.1 and DWC 3.1.1?

Use 2.0.7 with 2.05.1 as that is the DWC version provided in that release.

Please share the contents of the macro. There should be no difference in the behaviour.

@Veti

they are a little older and weaker than I need, I decide to pick up these

https://www.moonsindustries.com/m/p/nema-17-high-precision-hybrid-stepper-motors/ms17ha4p4200-000004611110015912

I required a 34 max millimeter length
They should do the trick - replacing the stock ones of a Cetus MK3 - Proof of concept

Thanks guys