I can confirm that DWC 2.05 has fixed this issue 🙂
Great work & thanks.

@pipersw I did not know that M81 would also work. Thanks for that!

@chrishamm date didn't changed but the issue seems to have sorted itself, anyways;

Thank you! it seems the issues have been resolved, and we now have the option of selecting from the autocomplete list with enter or tab. Where enter sends immediately and tab just populates the input area for editing. Hitting escape to dismiss the autocomplete list and subsequently pressing enter will send what is shown in the input area.

Using arrow keys up/down will bring back the autocomplete list, I guess it could skip that if the only stored entry is identical to the input area, but other than that a nice feature. Allowing the delete key to act as a hotkey to remove the currently highlighted autocomplete entry would be the cherry on top.

two thumbs up!

@Phaedrux

ayyyy

it worked dude!!

Thanks a lot for helping me getting this up and running!

nice!!!.PNG

@mloidl said in Web control ver 2 'close file' icon:

DWC 2 is build around Material Design. This is the reason for the location of the 'X' Button. See https://material.io/components/dialogs/#full-screen-dialog for the specification.

Interesting link - thanks for posting that ... and there it is, on the top left!

While I still think it's goofy, at least now I know that there is some reason and some logic behind it all.

@hbrownell said in Bed leveling dual Z motor programming:

... Here is the bed.g code
G28 ; home
M401 ; deploy Z probe (omit if using bltouch)
G30 P0 X20 Y100 Z-99999 ; probe near a leadscrew, half way along Y axis
G30 P1 X180 Y100 Z-99999 S2 ; probe near a leadscrew and calibrate 2 motors
M402 ; retract probe (omit if using bltouch)
...

if you dont use a bl touch remove the M402

; Drives
M569 P0 S0 ; Physical drive 0 goes Backwards
M569 P1 S0 ; Physical drive 1 goes Backwards
M569 P2 S1 ; Physical drive 2 goes forwards
M569 P3 S0 ; Physical drive 3 goes forwards

M584 X0 Y1 Z2:4 E3; two Z motors connected to driver outputs Z and E1
M671 X-20:220 Y0:0 S0.5 ; leadscrews at left (connected to Z) and right (connected to E1) of X

M350 X16 Y16 Z16 E16 I1 ; Configure microstepping with interpolation
DO I NEED TO CALIBRATE EACH STEPPER MOTOR INDEPENDENTLY?
M92 X99.9 Y100.1 Z399.6183 E100 ; Set steps per mm
M566 X900.00 Y900.00 Z12.00 E120.00 ; Set maximum instantaneous speed changes (mm/min)
M203 X6000.00 Y6000.00 Z4000.00 E1200.00 ; Set maximum speeds (mm/min)
M201 X500.00 Y500.00 Z20.00 E250.00 ; Set accelerations (mm/s^2)
M906 X1100.00 Y1100.00 Z1100.00 E1100.00 I30 ; Set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout
; Axis Limits
M208 X0 Y0 Z0 S1 ; Set axis minima
M208 X210 Y210 Z200 S0 ; Set axis maxima

M208 X-5:205 Y0:200 ; X carriage moves from -5 to 205, Y bed goes from 0 to 200

; Endstops
M574 X1 Y1 S1 ; Set active high endstops
; Z-Probe
M574 Z1 S2 ; Set endstops controlled by probe
M307 H3 A-1 C-1 D-1 ; Disable heater on PWM channel for BLTouch
M558 P9 H5 F120 T6000 ; Set Z probe type to bltouch and the dive height + speeds
G31 P500 X34.82 Y-8 Z0.073 ; Set Z probe trigger value, offset and trigger height
M557 X0:200 Y15:200 S50 ; Define mesh grid
; Heaters
M305 P0 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 0
M143 H0 S120 ; Set temperature limit for heater 0 to 120C
M305 P1 T100000 B4725 C7.060000e-8 R4700 ; Set thermistor + ADC parameters for heater 1
M143 H1 S280 ; Set temperature limit for heater 1 to 280C
; Fans
M106 P0 S0 I0 F500 H T45 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned on
M106 P1 S1 I0 F500 H1 T45 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on
; Tools
M563 P0 D0 H1 ; Define tool 0
G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets
G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C
; Automatic saving after power loss is not enabled
; Custom settings are not configured
; Miscellaneous
M501 ; Load saved parameters from non-volatile memory

The implementation of the "Connecting" dialog (including the annoying gray backdrop) has changed in DWC 2.0.5. I haven't been able to reproduce this bug since then.

DWC 2.0.5 uses the values from its object model to set the values in the mesh edit dialog but those values aren't updated from RRF/DSF yet. That will be likely implemented in DWC 2.1.0.

Wow it was simple, works perfectly, thank you.

Can you explain what exactly isn't working? I can upload files without a problem on my cell phone by pressing the button with the three dots and then clicking on the "cloud upload" icon.

Are you sure that you have selected a tool?

@spllg I'm glad it worked.

Hopefully someone can solve your ATX control question.

I'd also like to see that answer because I find my solution (adding M80 to config.g) inelegant. And sometimes want to start my machine with the power supply off but still have the control available on the screen.

@droftarts

My internet in the building with the printer is a special kind of horrible, the main DSL hasn't been much better. I've spent the last 2 days working on the system. Fixed DSL, I think. Ran ethernet to building and removing the cheap wifi booster out here.

I've changed the wifi name and password in the config.g file on the duet. But it's still connecting to the old wifi. How do I get it to change over?
NEVERMIND: That was way harder than it should be.
Thanks
Cory

Haven't got into those yet - been using Marlin for 2 years ... not used to doing so much for myself 👶 ... I'll get there.

No issues at all here really. Any opportunity to learn and gain experience isn't wasted time for me.

I shall be putting your macros to the test over the coming weeks whilst commissioning a new linear rail based CoreXY and figuring out its limits (and mine).

OK, it's working when the "filament" folder is created in root, not in sys directory.

Thanks

@jay_s_uk said in web interface partially stuck after button press:

Upgrade to the full 2.05 as there was a bug in 2.05 RC1 stopping it work with DWC 2.0.4

hi thanks, I upgraded just now and the Home All button works, but Retract and Extrude buttons are still greyed out, I supposed there' something else going on? Extrude and retract macros work fine. Printing is otherwise retract and extrude inoperative.PNG fine, too.

If you send M122 it will report a diagnostic. Near the end it shows wifi information including the signal strength.

@dc42 In the past with a different router, I had assigned an IP address to the duet on the router side, but never assigned a static ip on the board. AFAIK, nothing on my network uses a static IP, considering my subnet went from 10.0.0.x to 192.168.1.x on this new router, and I haven't had anything not connect to it. Should I maybe try a static IP?

@droftarts said in Heightmap.csv does not get loaded when using M505:

It will need the working path to be added to an M408 response, and for DWC to read that path to fix.

The M408 part is already implemented in RRF 2.05 and 3.0RC1. The other part should be in DWC 2.0.5.